NHỮNG VẤN ĐỀ THƯỜNG GẶP KHI SỬ DỤNG XE NÂNG HÀNG

Like any vehicle, through a process of use, problems will arise; Forklifts are no exception. Today's article will share with readers common problems when operating forklifts.

Oil loss

One of the common problems when operating forklifts is oil loss. Using fuel with many impurities can clog the vehicle's pipes.

At this time, impurities and dirt will stick to the smaller fuel injection holes, causing the forklift to run weaker, causing scratches on the high-end pump, causing rust on the nozzle and causing serious damage to the vehicle. more important.

​

Therefore, to avoid this situation, you need to pay attention to preserving and checking your vehicle's fuel regularly, ensuring safety in operating and maintaining forklifts. Besides, don't forget to cover the trunk of your car to avoid influences from the outside environment.

Damage to the gearbox

Gearbox damage is a common problem when operating forklifts if the driver does not operate properly or does not pay careful attention. Sudden gear changes can also cause the transmission to break and wear out the bearings; causing broken seals or seals, causing oil leaks and transmission clamping. This problem occurs largely due to drivers' lack of experience and operating skills.

Tam bua damaged

After a long period of continuous use, forklift brake parts wear out and brake pads gradually wear down to the metal part, which is inevitable if the driver does not pay attention to regular inspection. At this time, stepping on the brake will feel deeper than usual, the brakes will not work or when braking will make strange noises...

To handle this problem, immediately contact the forklift supplier for timely inspection, maintenance and repair. Absolutely do not continue to operate the vehicle because it can break the tambua, causing very serious damage as well as unwanted incidents.

Damage to the digital control lever
​

Damage to the gear lever control lever is also one of the common problems when operating forklifts. This error occurs mainly because the driver operates incorrectly, causing damage to the plastic ring holding the gear lever and signal light.

However, due to incorrect operation, the driver uses his whole arm to push forward or grab and yank back, causing the plastic ring (hard plastic) to break, causing damage to the gear control lever.

To solve this problem, the forklift driver needs to be properly trained and handle the problem quickly and gently to help the forklift parts operate smoothly.

Above are common problems when operating forklifts that Mhe wants to share with readers. Hopefully with this useful information, readers will have a more general overview of the matter

Damaged ram (Mayo) and rear wheel brace

This error occurs due to incorrect operation of the operator who runs too fast and does not thoroughly check the forklift before using it. After a long period of operation, the wheel hub and screws can loosen and cause corrosion, breaking the car's rim and rim. Therefore, it is mandatory for forklift operators to check the vehicle before operating.

How to do it: Use your hands to test the screws on the 2 rear wheels to see if they are loose or not. If they are loose, use a tool to tighten them thoroughly before operating the vehicle.

Fork break error and fork difference

The cause of this error is that the driver uses the fork to lift incorrectly:

– Use the fork to pull and push the package

– Using a lifting fork that is overloaded compared to regulations

– Using the lift at the wrong angle

– Using a fork to lift goods or display goods causes shouting at the fork

Error of scratches on hydraulic cylinders

This error is mainly due to external impacts falling on the hydraulic cylinder, crashing the vehicle, impacting or placing heavy hard objects on this part, leading to wear and scratches.